| Sr. No. | Machine Model | make |
Nos. | Capacity |
|---|---|---|---|---|
| A | CNC Machine: 03 Nos. | |||
| 1 | CNC Lathe Model Vantage 800 | ACE Designers | 01 No. | Dia 500 X 800 L |
| 2 | CNC Lathe Model LT 20 | ACE Designers | 01 No. | Dia 400 X 670 L |
| 3 | CNC Lathe Supper JOBBER 500 | ACE Designers | 01 No. | Dia 250 X 500 L |
| B | Lathe Machine: 11 Nos. | |||
| 1 | Heavy Duty 9’ x 20” | Parcal | 01 No. | Dia 1200 X 1500 L |
| 2 | Heavy Duty 9’ x 20” | Riddhi | 01 No. | Dia 1200 X 1500 L |
| 3 | Heavy Duty 7’ x 12” | Parcal | 03 Nos. | Dia 700 X 2000 L |
| 4 | Heavy Duty 7’ x 9” | Roshani | 02 Nos. | Dia 700 X 1500 L |
| 5 | Heavy Duty 7’ x 9” | Kirloskar | 03 Nos. | Dia 700 X 1500 L |
| 6 | Heavy Duty 9’ x 9” | Nagmati | 01 No. | Dia 800 X 1500 L |
| 7 | Heavy Duty 12’x 10 | Parcal | 01 No. | Dia 700 X 1800 L |
| C | Drilling Machine: 11 Nos. | |||
| 1 | Radial Drill – 2.5” | Ikeda (Japan) | 01 No. | Dia 65mm |
| 2 | Radial Drill – 1.5” | Siddhpura | 05 Nos. | Dia 40mm |
| 3 | Radial Drill – 1.5” | Modern | 01 No. | Dia 40mm |
| 4 | Pillar Drill – 0.75” | S.K.P. | 02 Nos. | Dia 20mm |
| 5 | Radial Drill – 2” | MAS |
02 Nos. | Dia 50mm |
| D | Shaping Machine: 05 Nos. | |||
| 1 | Shaping Machine – 30” | Tiger |
02 Nos. | 800mm X 800L |
| 2 | Shaping Machine – 30” | Decent | 03 Nos. | 800mm X 800L |
| E | Planning Machine: 01No. | |||
| 1 | Plano miller Machine – 4’ x 8’ | Tiger |
01 No. | 1200mm X 2400L |
| F | Hacksaw Machine: 02 Nos. | |||
| 1 | Hydraulic | Mack well | 01 No. | Dia 250mm |
| Hydraulic | Jaswant | 01 No. | Dia 250mm | |
| G | Compressor: 01 No. | |||
